Imperial IRF-25 Pro Range Match Deep Fryer, (7.78) inch, (25)lb(s) Oil Capacity, (2)Tube Fired Burner(s), Floor Model, (2)Basket(s), 70k Total BTU/Hr, NSF Listed

Imperial IRF-25 Pro Range Match Deep Fryer, (7.78) inch, (25)lb(s) Oil Capacity, (2)Tube Fired Burner(s), Floor Model, (2)Basket(s), 70k Total BTU/Hr, NSF Listed

DEEP FRYER Model No: IRF-25 

From the Manufacturer 

TUBE FIRED BURNERS

• High efficiency burners have large heat transfer tubes.
• Tubes are constructed of heavy gauge stainless steel with a built-in deflector system.
• Snap acting thermostat has a 200ºF - 400ºF. (93ºC - 204ºC) temperature range.
• Millivolt temperature control circuit.
• Fast recovery to desired temperature.
• Heats oil quickly producing a better tasting product with less oil absorption.
• 100% safety shut-off valve.

LARGE COLD ZONE

• Captures and holds particles out of the fry zone.
• Reduces taste transfer.

STAINLESS STEEL FRYPOT

• Frying area for the 25 and 25/25 lb. models is 6-3/4” x 14” (171 x 356 mm),14” x 14” (356 x 356 mm) for the 40 and 50 lb. models and 18” x 18” (457 x 457 mm) for the 75 lb. model. Frypots are robotically welded stainless steel.
• Fine mesh wire crumb is included.
• Recessed bottom facilitates draining, slants toward the drain.
• 1-1/4” (32 mm) full port drain valve empties frypot quickly and safely.
• Two large, nickel-plated fry baskets with vinyl coated, heat protection, handles are included (except IRF-25 and IRF-DS).
• Basket hangers are stainless steel.

EXTERIOR FEATURES

• Stainless steel front, door, sides, basket hanger and frypot.
• Welded and polished stainless steel seams.
• Large 3” (76 mm) stainless steel landing ledge to match Restaurant Series ranges.
• Full heat shield protects control panel.
• Full bottom chassis provide structural support.
• Plate mounted 6” (152 mm) heavy duty stainless steel legs or optional casters assures secure support.
• One year parts and labor warranty. Limited warranty on frypot, stainless steel frypot is five years pro-rated.

OPTIONS AND ACCESSORIES

• Extra fry baskets with vinyl coated handles
• Gas shut off valve, 3/4” N.P.T.
• Quick disconnect and flexible gas hose, 3/4” N.P.T.
• 20-1/2” (521 mm) stainless steel backguard Stainless steel tank cover
• Stainless steel joiner strip
• Stainless steel drain shelf
• Heat lamp for IRF-DS
• 6” (152 mm) casters 

CLEARANCE REQUIREMENTS 

For use only on non-combustible floors. Legs or casters are required for non-combustible floors; or 2” (51 mm) overhang is required when curb mounted. Provide 0” clearance from non-combustible surfaces and 6” (152 mm) from combustible surfaces.

WARRANTY

• One year parts and labor warranty. Limited warranty on frypot, stainless steel frypot is five years pro-rated. 

(Model may differ from images shown)

  WARNING: Attention California Residents - Prop 65 Warning www.P65Warnings.ca.gov